The Ring Video Doorbell is a popular choice for homeowners, but a recent recall has raised concerns. The Consumer Product Safety Commission (CPSC) and various media outlets report that over 350,000 of Ring’s 2nd generation video doorbells have been recalled due to a fire risk. This recall affects devices sold on Amazon and the Ring website between June and October 2020.
The issue lies in the doorbell’s battery, which can overheat if incorrect screws are used during installation. This defect has already led to reports of property damage and minor burn injuries. The affected models include the Ring Video Doorbell 2nd Generation with model number 5UM5E5, available in satin nickel and Venetian bronze finishes.
If you own a Ring Video Doorbell 2nd Generation, check the device’s serial number to see if it is part of the recall. Ring LLC is advising customers to follow revised installation instructions to avoid using incorrect screws that could damage the battery and pose a fire hazard
People who are hurt by defective products may be eligible for compensation from the designers, manufacturers, or distributors of the product. If you were injured due to a product malfunction, contact the Las Vegas product liability lawyers at THE702FIRM Injury Attorneys today for a free consultation.
The Recall Details of Ring Video Doorbells
Ring recalls video doorbells recalls its video doorbells 2nd generation due to a fire hazard, as confirmed by the Consumer Product Safety Commission (CPSC). The issue stems from the incorrect doorbell screws installed. If the wrong screws are used, the video doorbell’s battery can overheat, causing an electrical short and posing fire hazards.
There have been approximately 50 reports of property damage and eight reports of minor burns linked to these doorbells. While the defective units have been recalled, you don’t need to return them. Instead, Ring has provided updated installation instructions to ensure safe use.
Moreover, check your doorbell’s serial number to confirm if it’s part of the recall. The recalled units include the 2nd generation model number 5UM5E5 in satin nickel or Venetian bronze finishes. Look for the Ring logo on the device’s front and double-check your unit’s model information.
For affected units, follow Ring’s revised installation guidelines, ensuring that no incorrect screws are used. The correct screws are critical to preventing overheating and ensuring your video doorbell’s safety. If you have any doubts, contact Ring directly or visit their official recall link for more information.
Stay informed, stay safe, and always use the right screws when installing your Ring Video Doorbell.
For more information about what to do if your doorbell is part of the recall, visit Ring’s recall link here.
Are Companies Liable for Injuries or Damage Caused by Defective Products?
Yes, companies can be held liable for injuries or damage caused by defective products under a legal principle known as product liability. Product liability laws vary by jurisdiction, but generally, manufacturers, distributors, suppliers, and retailers can all be held accountable if a product they place into the marketplace is found to be defective and causes harm. Liability typically arises in three main scenarios:
1. Design Defects
These occur when a product is inherently dangerous due to its design, even if manufactured correctly. If an injury is caused because a product’s design is unsafe, the manufacturer can be held responsible. For example, if a car’s brakes are designed in a way that makes it prone to failure, the manufacturer might be liable for accidents caused by this design flaw.
2. Manufacturing Defects
These arise when there is a problem in the manufacturing process that makes a product dangerous, even if the design is safe. For example, a batch of car tires with a production flaw that makes them more likely to blow out would be a manufacturing defect. If such a defect leads to an accident, the company that produced the tires could be liable.
3. Failure to Warn (Marketing Defects)
This type of liability is linked to inadequate warnings or instructions regarding the safe use of a product. If a product has non-obvious risks and the manufacturer fails to warn consumers, it could lead to liability. For instance, if a chemical cleaning product lacks clear warnings about the risks of mixing it with other chemicals, and this omission leads to an injury, the manufacturer could be held liable.
What is Product Liability in Las Vegas?
Nevada has one of the best product liability statutes for consumers. As a strict liability state, plaintiffs must only prove that they have been injured or faced property damage as a result of a product with flawed design, manufacturing methods, or warning labels.
In other words, the law states that you only have to establish that the product has a defect and that the defect caused your injuries. Your own conduct isn’t factored into the result the way it would be in other personal injury claims.
A recall can actually work in your favor if a defective product has hurt you. The recall can serve as evidence that the maker admits there was a problem with their product, strengthening your case for compensation.
Contact Our Las Vegas Defective Product Lawyers Today
At THE702FIRM Injury Attorneys, we have decades of experience representing consumers whose dangerous and defective products have been injured.
If you believe you should be compensated for damages caused by the Ring doorbell or any other product, call our Las Vegas lawyers today for a free consultation. There are time limits on many of these claims, and we can help you determine the best course of action to pursue the compensation that you deserve. Contact THE702FIRM Injury Attorneys now.
